Kit includes items necessary to clean and/or restore fiberglass hot sticks, booms, and buckets
Kit consists of…
All Purpose Cleaner – The all purpose cleaner provides a safe non-toxic liquid to aid in re-moving dirt, grease, metal oxides and other contaminants which accumulate on fiberglass
Ultra Fine Non-Metalic Abrasive Pads – Pads can be used with the all purpose cleaner to remove stubborn contamination. Note – fiberglass wax may be required after use of cleaner and/or pads to retain surface gloss.
Clear Epoxy Refinishing Kit – The two part refinish kit is used to bring the tool surface back to its original finish if normal cleaning is not sufficient
Synthetic Treated Wiping Cloths – Wiping cloths are used to remove light dust and dirt from stick surfaces. It is also needed after light cleaning of tool with all purpose cleaner to allow moisture to bead up on tool.
EPOXY REFINISH KIT
Kit provides all the necessary materials with complete instructions for restoring, fiberglass hot line tools and aerial lift booms and buckets equal to their original finish
The epoxy coating provides a hard, tough, moisture resistant high-gloss finish of high dielectric strength and is easily cleaned
Included in the kit are complete instructions, sandpaper, paint brush, and epoxy solvent
One quart of epoxy coating covers approximately 32 square feet of surface
The coating is a two-part system, available in both white and clear, dries dust free in approxi-mately 1 1/2 hours and cures completely within 24 hours
SIX PACK ALL PURPOSE CONCENTRATE CLEANING KIT
Includes the following: (6) 7 oz. ready to mix plastic containers of concentrated all purpose cleaner, (14) ultra fine non-metalic pads, (6) large adhesive backed identification labels to affix to your gallon containers after mixing
Each plastic bottle contains the correct amount of concentrate to mix with one gallon of water
Convenient to store-compact box with closable lid stores easily and you only mix when needed
Saves shipping costs of pre-mixed gallon containers
SYNTHETIC TREATED WIPING CLOTH
For added safety and increased life of live line tools
Deposits a water repellent film while removing dust and dirt particles from the surface of hot sticks and insulated tool handles
The cotton cloth is an open-type weave specially selected for remov-ing foreign material from the surface of insulated tools and has bound edges to eliminate fraying which extends the life of the cloth
The cloth is packaged in a sealed plastic bag with instructions for compliance with OSHA regulations for cleaning and inspection of live line tools
Regular use of the synthetic treated cloth will add to the life and safety of the tools.
KiiKsafety 