Kit includes items necessary to clean and/or restore fiberglass hot sticks, booms, and buckets
Kit consists of…
All Purpose Cleaner – The all purpose cleaner provides a safe non-toxic liquid to aid in re-moving dirt, grease, metal oxides and other contaminants which accumulate on fiberglass
Ultra Fine Non-Metalic Abrasive Pads – Pads can be used with the all purpose cleaner to remove stubborn contamination. Note – fiberglass wax may be required after use of cleaner and/or pads to retain surface gloss.
Clear Epoxy Refinishing Kit – The two part refinish kit is used to bring the tool surface back to its original finish if normal cleaning is not sufficient
Synthetic Treated Wiping Cloths – Wiping cloths are used to remove light dust and dirt from stick surfaces. It is also needed after light cleaning of tool with all purpose cleaner to allow moisture to bead up on tool.
EPOXY REFINISH KIT
Kit provides all the necessary materials with complete instructions for restoring, fiberglass hot line tools and aerial lift booms and buckets equal to their original finish
The epoxy coating provides a hard, tough, moisture resistant high-gloss finish of high dielectric strength and is easily cleaned
Included in the kit are complete instructions, sandpaper, paint brush, and epoxy solvent
One quart of epoxy coating covers approximately 32 square feet of surface
The coating is a two-part system, available in both white and clear, dries dust free in approxi-mately 1 1/2 hours and cures completely within 24 hours
SIX PACK ALL PURPOSE CONCENTRATE CLEANING KIT
Includes the following: (6) 7 oz. ready to mix plastic containers of concentrated all purpose cleaner, (14) ultra fine non-metalic pads, (6) large adhesive backed identification labels to affix to your gallon containers after mixing
Each plastic bottle contains the correct amount of concentrate to mix with one gallon of water
Convenient to store-compact box with closable lid stores easily and you only mix when needed
Saves shipping costs of pre-mixed gallon containers
SYNTHETIC TREATED WIPING CLOTH
For added safety and increased life of live line tools
Deposits a water repellent film while removing dust and dirt particles from the surface of hot sticks and insulated tool handles
The cotton cloth is an open-type weave specially selected for remov-ing foreign material from the surface of insulated tools and has bound edges to eliminate fraying which extends the life of the cloth
The cloth is packaged in a sealed plastic bag with instructions for compliance with OSHA regulations for cleaning and inspection of live line tools
Regular use of the synthetic treated cloth will add to the life and safety of the tools.
WIRE TONGS Wire tongs are usually used in pairs with supporting accessories to support and move ener- gized conductors away from the work area for replacement of insulators, cross arms, poles and hardware.
FEATURES AND BENEFITS:
Metal components are heat treated aluminum alloy or bronze alloy
Conductor jaws are interlocking to keep conductor positively engaged
Two conductor head sizes are available to accommodate a wide range of conductor sizes
Acme threads facilitate tightening of head
POLE TYPE SADDLES
Saddle is made from heat treated aluminum alloy materials
Chain tightener is spring loaded for easy installation and removal
Pole clamps are made from bronze alloy with large wing nut for easy operation.
CROSS ARM TYPE SADDLES
Saddle is made from heat treated aluminum alloy materials
Pole clamps are made from bronze alloy with large wing nut
Slotted base – bolts and wing nut are captive for easy instal- lation and removal
Fits crossarms 4 1/4” – 5 1/4” high x 2 3/4” – 4 1/4” wide
SADDLE EXTENSION
Attaches to Pole Saddle for additional 4 inches of clearance
Made from heat treated aluminum alloy
POLE CLAMPS ONLY
SPIRAL LINK STICK
The spiral link stick is designed to isolate rope lines, hoists and rope blocks. It is used to provide insulation between energized conductors and pulling devices which might be attached to a different potential.
One piece 1” O.D. fiberglass stick
Easy to apply, can be installed with hot line tools by use of the attached lifting eye
Spiral hook is made from high strength, heat treated steel
TEL-O-POLE® II The “No Twist” stick has a unique triangular design.
All models are heavy duty.
FEATURES AND BENEFITS :
Triangle shape enables each section to “lock in automatically”, no need to search for the button
Fluorescent green tip section is highly visible and has a foam core
Sections can be removed or added to make the stick the preferred length. Example: HV-235 remove 4 sections to make it 20 ft instead of 35 ft
Ergonomic design gives the operator a better gripping surface for better control
All sections have a smooth glossy surface for routine cleaning and waxing
HV-212
HV-216
HV-220
HV-225
HV-230
HV-235
HV-240
HV-245
DISCONNECT STICK
UNIVERSAL HOT STICKS
Sticks with universal head adapts to all standard universal fit on tools (See the Hotstick Accessories section of our catalog)
All sticks include a hanger hook.
UNIVERSAL – ONE END ONLY
UNIVERSAL – BOTH ENDS
UNIVERSAL TIE STICKS
Rotary Blade
Rotary Prong
Double Prong
WIRE HOLDING TOOL
MULTI-PURPOSE HOLDING TOOL For holding slack conductors during sleeving. Provides positive control for shaping and bending jumpers and controlling conductors when cutting.
ADJUSTABLE HEAD All of the same features of the rigid head plus the conven- ience of adjustment from straight to 30 degrees both sides of center. This gives the lineman better control options from multiple positions. A universal joint on the operating rod allows smooth, effortless control of the gripping pressure. Angle adjustments are obtained easily by means of a spring loaded thumb screw.
HOOK POLE / SHOTGUN STICK
FIXED LENGTH SHOTGUN STICK WITH EXTERNAL OPERATING ROD
FIXED LENGTH SHOTGUN STICK WITH INTERNAL OPERATING ROD
FOLDING SHOTGUN STICK WITH EXTERNAL OPERATING ROD
TELESCOPIC HOOK POLE
TEL-O-POLE® SHOTGUN STICKS Telescopic shotgun sticks can collapse for storage and extend to the length needed. See chart below.
TREE TRIMMING KIT
Open the tool kit bag and you have your choice of tree trimming tools in the length you need, all in a convenient heavy duty vinyl tool bag that offers long wear and maximum protection for the tools.
Kits are available with round or square pole sections in four or six foot lengths. Each kit contains the following items :
KiiKsafety 